JNOD KA33Z&KA33R - Wall Mounted Hand Wash Water Heater
JNOD Australia KA33Z and KR33R are designed to be operated hands free with the following features:
- ABS outer case,
- Compact design
- Concealed installation is available for water inlet
- The unit can provide cold water or hot water
- Control Knob can turn on/off the heater for Hot-Cold water and to adjust the inlet water flow
- Working indicating lamp to show the heaters working condition
- Overheat protection / Dry heating protection to avoid scalding
- Built-in pressure relief valve to prevent explosion.
- Stainless steel spout is available as a accessory
However the KA33R has additional features for easy of use and additional safety precautions.
- Hand induction for cold water or hot water
- One second to turn on/off the unit while hand close to induction area
- After your hand has been close to the unit for 5 seconds, the unit will turn off
- The unit will stop working automatically after 10-20 seconds after your hand was removed from the induction area.
Need hot water over a sink for washing hands due to Covid19, then this is your solution to maintaining controal of your home or workplace.
- Activate Water Pressure: 0.06MPa.
- Overheat Temp: 60 °C.
- Thermal cut-off: 90 °C.
JNOD KA33Z&KA33R - Wall Mounted Hand Wash Water Heater
- ABS out case, compact design.
- Concealed installation is available for water inlet.
- Hand induction for cold water or hot water.
- 0.1 second to turn on/off the unit while hand close to induction area.
- After the unit have been working for 5 seconds, hand close to the induction area can turn off the unit.
- The unit will stop working automatically in 10-20 seconds if there is no hand close to induction area.
- Working indicating lamp to show the working condition.
- Overheat protection & dry heating protection to avoid scalding.
- Built-in pressure relielf valve to prevent an explosion.
- Stainless steel spout is available as a accessory.
- Inlet water flow is adjustable by the knob.